803-328-0000
mike@scubaventures.net
Categories
Shopping Cart: 0 items
Your cart is empty

When you learned to dive, you were taught specific skills to make you safe and comfortable underwater and at the surface. One of those skills was Buoyancy Control. Once you start diving for fun you use your BCD constantly thru-out the dive. Your octopus or alternate air source on the other hand is never used unless there is an emergency out of air situation. Reacting properly in an out of air emergency can make the difference between a safe dive and a tragedy. If your Octopus & BCD Inflator Device are combined, you will always know where to find it in an emergency. 

The SS1 takes the concept to new levels of convenience, reliability & performance. It contains a high flow 2'nd stage that performs like many high performances second stages. It will deliver air to a diver at depth with minimal effort. It is very stable and not prone to unnecessary free-flow or leakage from water movement while swimming, or during entries or exits. The inflator/deflator is easy to operate with soft-surfaced buttons placed where they can be easily operated with one hand. 

The SS1 features a quick disconnect not only on the low-pressure hose, but the BCD hose as well. The adapters that fit the SS1 to the BCD are connected to the SS1 with a threaded collar that can be easily unscrewed to detach it completely from the BCD. Now you can carry or store the SS1 with your primary regulator and gauges (patent pending). 

The SS1 combines the functions of the inflator and octopus regulator into a single unit. This reduces the overall bulk and weight of your dive gear; eliminates hoses, and places your back up regulator in a fixed, familiar location. This time proven concept is a convenient and efficient alternative to the dedicated octopus second stage. Reduce your rig by one hose with the high- performance Atomic SS1. The high-flow, low-pressure disconnect is interchangeable with many other models yet smaller size and lighter in weight. Large oversized and ergonomically shaped buttons are easy to find for pneumatic or oral inflation and deflation. They are easy to distinguish and faced with soft tactile rubber surfaces. 

The elliptically shaped body of the SS1 lies flat against the BCD keeping it out-of-the-way and reducing drag. Seat wear is the first cause of regulator leaks and performance degradation. The stainless steel dynamic orifice is pressure energized and only- contacts the rubber seat when in use. Equipped with a titanium lever this high strength metal part is the link to your air supply and will never fail due to rust or corrosion. The integrated purge cover is a one-piece flexible cover allows purge of the regulator when depressed anywhere on the cover surface. 

The SS1 has titanium inflation/deflation stem, demand valve body, stainless steel orifice and springs and a titanium and 316-grade stainless steel quick disconnect. The mouthpiece and diaphragm are silicone rubber and the SS1 body is manufactured from fiberglass reinforced nylon. The SS1 is a dependable downstream demand valve design. The SS1 weighs 6.3 oz. (180 g) without the hose and the hose also weighs 6.7 oz. (190 g) and measures 28" (71 cm) in length.

Warranty Information

This product has a limited warranty of 36 months.

http://www.atomicaquatics.com/warranty.html

714-375-1433

Atomic Safe Second Inflator (SS1), Titanium Features

  • Atomic Safe Second Inflator (SS1), Titanium:
  • Increased Safety in Out-of-Air Emergencies
  • Lightweight, Streamline, Eliminates Backup-Regulator (Octopus)
  • Easily-Operated with One-Hand
  • Convenience, Reliability and Performance
  • High Flow Second Stage
  • High Flow Rates to Diver at Depth with Minimum of Effort
  • Stable Not Prone to Free-Flow or Leakage from Water Movement
  • Soft-Surfaced Buttons
  • Adaptability to Almost Any BCD: Set-of-Adapters
  • Quick Disconnect BCD Hose: Easily Unscrewed-to-Detach It Completely from BCD
  • Carry or Store the SS1 with Primary Regulator and Gauges
  • Inflator and Octopus Regulator in Single Unit
  • Reduces-the-Overall Bulk and Weight of your Dive Gear
  • Eliminates Octopus Hose: Reduce Rig by One-Hose
  • Convenient-and-Efficient Alternative to Dedicated-Octopus Second Stage
  • Large Oversized and Ergonomically-Shaped Buttons
  • Easy-to-Find for Pneumatic or Oral Inflation/Deflation
  • Elliptically-Shaped Body Lies-Flat Against BCD Keeping It Out-of-the-Way & Reducing Drag
  • Stainless Steel Dynamic Orifice is Pressure Energized
  • Integrated Purge Cover is a One-Piece Flexible Cover, Depress Anywhere on Cover Surface
  • Titanium Components:
    Inflation/Deflation Stem
    Demand Valve Body
    Lever High-Strength Metal Will Never-Fail Due to Rust or Corrosion
    Titanium & 316-Grade Stainless Steel Quick Disconnect
  • Stainless Steel Orifice and Springs
  • Silicone Rubber Mouthpiece and Diaphragm
  • Housing: Durable Fiberglass Reinforced Nylon
  • Dependable Downstream Demand Valve Design
  • Weight with Hose: 13 oz. (370 g)
  • Hose Length: 28" (71 cm) with Standard 3/8" Threads
  • Owner's Manual

Atomic SS1 Titanium

$389.95

Current Reviews: 0

This product was added to our catalog on Monday 29 July, 2019.